Results 1 to 7 of 7
Thread: 12" heatbed relay issues
Hybrid View
-
01-16-2015, 11:39 AM #1
- Join Date
- Aug 2014
- Posts
- 24
Assuming the relay is still working, why don't you remove both wires from the top connector and solder them together. The relay will still be able to open/close the second connector which will still connect or break the circuit for the heatbed as needed. I think this actually recommended on another thread on here.
-
01-16-2015, 12:32 PM #2
-
01-16-2015, 02:16 PM #3
- Join Date
- Aug 2014
- Posts
- 24
I wasn't aware of that, Thanks for the info.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials