Results 1 to 1 of 1
-
09-10-2022, 08:12 PM #1
- Join Date
- Sep 2022
- Posts
- 1
Adventurer 4 - Preset level, or way to quick mod an individual calibration zone?
Hey folks,Relative noob to 3d printing. I'm working with a Flashforge Adventurer 4. I'm running the most recent firmware 2.1.8.2.2.It looks like these units require re-leveling when using different build surfaces (stock vs PEI sheet), as well as different bed temperatures cause expansion and re-leveling as well. Seems like a royal pain to have to run a 10 min calibration every time I need to change my print surface, temperature and/or filament type.I've poked around through the menus, and didn't see anything, but thought it best to ask:- Is there any way to save a calibration preset?- Is there any way to change the value on any of the 9 zones without having to run a full calibration sequence?Many thanks!
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery