~ VSCode squiggles are gonna be the death of me

[Roberts_Clif]

Zip directory of your modified Marlin firmware used for VS-Code.

Enabled your display.

[Bruce19]

Rob right now Im doing it again.

[Roberts_Clif]

Wish you the best of luck.

if you get a error post your Configuration with your changes.

[Roberts_Clif]

No you do not have to.

It is only a suggestion, when you get your current firmware working real good.An want to make tuning Z-Offset simpler.

[Roberts_Clif]

Those line for configuration_adv.h allow you to have another menu location below.

Click > Configuration > Advanced Settings Click
Probe Offset > Click Z Probe Wizard

3D Printer will home
Using Move menu items adjust ti the thickness of a piece of paper of a filler gauge.
Clink on Done
Find Store Settings and save.

start a print, with a couple skirt loops on first layer.
While printing the skirt if it is a little too thick or too thin select menu item babystep Z.

Click Select Tune
Select BabyStep Z adjust until you see that perfect layer
Back out and find Store Settings new Z-Offset is saved

When I first started this menu Item was not available an could take a long long time to adjust Z-Offset.
Later it would take several minutes.

With this LCD control I can set a new Z-Offset is short order.
Once Z-Offset is set you can print over and over again without messing with any settings.
Some times you can go months. Other time it is perfect just with Probe Offset Wizard.

[Roberts_Clif]

Think I see what you did.

Posted Another link

Bruce19.jpg

[Bruce19]

Rob nope no luck still get errors when compile this time I wrote most steps down as did them . i wrote to teaching tach asking what version vsCODE he used in those videos, havent heard back, LOL I even looked online for vsCODE firmware expert I could pay to fix ewrrors LOL Thats how desperate I'm gettingBruce

[Bruce19]

Rob today I down loaded for github the config.h and config.adv files already set up for ender 3 with skr 1.4 Now Im not sure it for turbo 1.4 as I cant find the platform INI file?

[Bruce19]

ROB Hers my latest attempt I down loaded config files from github for ender 3 pro and skr 1.4 turbo the ini from marlin 2.0 When copiled this one it only showed 1 error about LPC1769 ??

[Roberts_Clif]

Bruce19 it is in a folder called Bruce19 on my hard drive, and Now it is also a link on my google Drive.

Now this is what I do When I get a working any thing I duplicate and archive creating a working version.
When I want to make changes I duplicate the folder renaming to a folder to show it is different.

Example Folder Name "Marlin 2.0.6.1 Blu"
Example Folder Name "Marlin 2.0.6.1 Blu with BL touch"