Results 1 to 1 of 1
Thread: Pegasus 12, extruding thin walls
Hybrid View
-
02-14-2018, 01:41 PM #1
- Join Date
- Jul 2016
- Posts
- 7
Pegasus 12, extruding thin walls
I'm at loss after trying to fix this for months.
Only mod is the acme rods for Z axis. It uses E3D v6 extruder with stock Ramp 1.4 board. No matter what settings I change (Zsteps, extruder multiplier setting) it seem to print thin wall. It seems like it's not extruding enough. Any ideas or suggestions?
thinwall.jpg
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials