Results 1 to 3 of 3
Thread: Printer Pre-Extrusion
Threaded View
-
12-26-2017, 04:09 PM #2
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
It might not be locating the Z zero point accurately. Have you calibrated that so the nozzle is almost but not quite touching the bed? Also, many print beds need a little help with adhesion. Some use a proprietary material like Printbite, others use blue tape, hair spray, or those glue sticks that are purple until they dry. Don't worry about a little bit of filament dribbling out at the beginning of a print, that's pretty normal.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help