Thanks for the reply RobH2, I found the Solidoodle Wiki after Googling and I leveled the bed, and calibrated the Z axis. I am able to print now, but am having a horrific time with edges peeling up after 5-6 layers. It's not a glass bed, it's a heated aluminum bed with Kapton tape. I did some research online again, and have tried some ideas I found like scratching the surface of tape with Sandpaper, and cleaning with acetone. I have the Bed set to 105C which seems to stick well for the first layer, but after repeated passes the corners start to peel up which warps the final product. I haven't tried the hairspray method yet, that's next. I'm hoping that I'm not going to have to do the ABS glue method every time I want to print.