Results 1 to 10 of 40
Thread: PLA Suddenly Jamming Mid-Print
Threaded View
-
08-18-2016, 06:38 AM #26
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
The point that the filament enters the hot end should be cold enough to touch when things are operating. This is the top of the cooler in most designs not the top of the heater block.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials