Itty Bitty Double FLEX Extruder

[jasay]

Thanks..i wasnt sure...cuz on his site it says coming soon.

Yeah. The marlin configuration page does. The itty bitty flex assembly page lists this one.

[clough42]

Thanks..i wasnt sure...cuz on his site it says coming soon.

Whoops. I'll fix that right now.

[clough42]

Whoops. I'll fix that right now.

Fixed. Sorry about that.

[voodoo28]

no worries!
Im still trying to work out the positioning of the heater wires where they dont get in the way of the Z probe arm.
might need to route all wiring out through the back in order to get the probe free of any wires.

Fixed. Sorry about that.

[voodoo28]

the space is very limited in the left side..

[voodoo28]

C42, per your instructions.. The hot ends should be 20 mm apart..mine are 26 apart..i cant see how 20mm is a achievable without having the slanted inwards towards each other..this measuring from tip to tip

[jasay]

From the OP:

Key features:

• Designed for Hexagon or E3Dv6 hot ends on 27mm centers

The older design of IBDE is 20mm. Can't get to c42's website from work to see if the assembly instructions have a copy/paste error from the other design.

[voodoo28]

.the site says 20mm under installation instructions..

From the OP:



The older design of IBDE is 20mm. Can't get to c42's website from work to see if the assembly instructions have a copy/paste error from the other design.

[sniffle]

It's 25mm on center for the Flex E3D i would assume it's the same for the hexagon's

[clough42]

C42, per your instructions.. The hot ends should be 20 mm apart..mine are 26 apart..i cant see how 20mm is a achievable without having the slanted inwards towards each other..this measuring from tip to tip

From the OP:



The older design of IBDE is 20mm. Can't get to c42's website from work to see if the assembly instructions have a copy/paste error from the other design.

.the site says 20mm under installation instructions..

It's 25mm on center for the Flex E3D i would assume it's the same for the hexagon's

Ugh. Yes. It should say 27mm. I have updated the pages I could find. If you find that error anywhere else, please let me know.