MakerFarm 8" i3v Prusa build by Printbus

[beerdart]

Nice and neat great job. One thing I changed was the screw terminal connector on the Ramps(POS would cause power drop outs). I removed the connector and installed two weatherpak connectors with the wires directly soldered to the board.

[printbus]

...One thing I changed was the screw terminal connector on the Ramps(POS would cause power drop outs). I removed the connector and installed two weatherpak connectors with the wires directly soldered to the board.

Thanks for the insight. I've stayed away from the pluggable screw terminals in my designs because of that possibility, but I figured I'd leave these on since the board came that way. Now I'm not so sure...