Results 1 to 10 of 38
Thread: Surface Smoothness
Hybrid View
-
06-07-2014, 03:05 AM #1
- Join Date
- Jun 2014
- Posts
- 5
I know that the B9 Creator needed to add a gasket behind the lens to keep out dust (after adding spacers). Is this something that you will provide, or will this need to be sourced/created individually?
Also, when you say 2-3% pigment do you mean 2-3% by weight? For example if I have 1 liter of SubG+ (unpigmented) how much red resin would I need to add?
Thanks!
-
06-07-2014, 06:37 PM #2
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
If there is no special need, we don’t recommend modifying lens. Lens modification is not part of the standard printer that we will be shipping. We are not currently supporting a gasket unless there is enough demand for us to customize a part in the future. The gap can be simply covered with black electric tape.
It's actually 2-3% in volume but yes it should be close to 2-3% by weight too. Thanks!
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials