Sticking too well!

[AbuMaia]

the other thing you can try is a freezing spray. Plumbers supplies shops sell it.

Spraying one of those canned dusters upside down will do the same thing.

I once had trouble with a piece printed in ABS warping. I tried all the adhesive options, with no luck. Then I tried using blue painter's tape, with hairspray on the tape, with ABS juice on the hairspray. The ABS still warped, but it stuck so well that it flexed the glass too, breaking it.

[lakester]

Well, yes, but you invented Super Tape. You WOULD be rich..., but you gave away the secret formula...

Spraying one of those canned dusters upside down will do the same thing.

I once had trouble with a piece printed in ABS warping. I tried all the adhesive options, with no luck. Then I tried using blue painter's tape, with hairspray on the tape, with ABS juice on the hairspray. The ABS still warped, but it stuck so well that it flexed the glass too, breaking it.