Camera and projector fine adjustments

[pma]

Do a search in this forum for "focus" I seem to remember a couple of other members with the same issue. Perhaps they can respond.

[scobo]

Do a search in this forum for "focus" I seem to remember a couple of other members with the same issue. Perhaps they can respond.

This one .... http://3dprintboard.com/showthread.p...ighlight=Focus

[Dudemeister]

This one .... http://3dprintboard.com/showthread.p...ighlight=Focus

Seen that one, and it looks like he adjusted the projector a bit, which is what I might try this weekend.

BTW, are you the same scobo that is active on Soliforum? I'm on that forum under my last proper name, pirvan.

[scobo]

Seen that one, and it looks like he adjusted the projector a bit, which is what I might try this weekend.

BTW, are you the same scobo that is active on Soliforum? I'm on that forum under my last proper name, pirvan.

Yeah, that's me. Same usename on the Voltivo forum too.
Small world, eh ?

[Dudemeister]

I did that but unfortunately, there was no real answer. In fact someone else had a very similar issue as mine (the 2 cameras are not focusing on the same plane), was told that this is common and that free scan would take care of it, but it doesn't really help a lot.