Results 1 to 10 of 39
Thread: Einscan-SE to SP conversion
Hybrid View
-
12-24-2022, 04:17 PM #1
- Join Date
- Dec 2022
- Posts
- 2
Hello I am new to this forum I recently purchased an Einscan SE however the previous owner didn't have the calibration board and stand. Could someone please scan the board or measure the key dimesnsions dot size and outside board dimensions. I was planning on recreating the board by printing on card and using a aluminuim back plate. I have contacted Einscan to request availability to procure but no response at present. Any help appreciated. Thanks
-
12-30-2022, 03:34 PM #2
- Join Date
- Jun 2021
- Posts
- 6
Hi,Here's a scan as you asked:https://www86.zippyshare.com/v/l62CKex5/file.html
-
12-31-2022, 02:53 AM #3
- Join Date
- Dec 2022
- Posts
- 2
Hi thank you very much do I need a password as I have the forbidden page when I click on the link
-
04-14-2023, 06:21 PM #4
- Join Date
- Apr 2023
- Posts
- 2
Hello, I have looked everywhere for the software but I can't find it, can you help me?
the download link doesn't work
-
01-25-2023, 05:32 PM #5
- Join Date
- Jan 2023
- Posts
- 1
This is so awesome, thank you for sharing! I knew that they were the same scanner but I didn't think you could get the features of the SP with the SE.
Last edited by bwtbd69; 01-25-2023 at 05:47 PM. Reason: found a link so I removed part of my post
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help