Nice, thanks for this - I am going through all of this now with this steaming pile I bought off Ebay - I should add none of this needed to be done to the flashforge.. thousands of hours printing, not one single modification - everything I added, I took off because it worked better without. Glass bed? well that's great but you lose 3-5mm of print height - and when your max is 15cm, which is really 14.5 realistically, then that .5 takes you down to 14cm.. I found believe it or not, I needed that .5 alot.

One thing I have added to the CTC is the spring loaded extruders. Now you can print these yourself, but the ones on thingiverse (sorry Mjolinor ) just didn't fit properly, the filament didn't grab tight enough. So I bought some cheap ones off ebay, as i've bought some before and they are really really good compared to the CTC stock ones.

The Flashforge original came with the same extruders as CTC, but when my dual head died, and I bought a replacement from FF, they gave me the new creator pro spring loaded ones, I never ever will go back to standard UNLESS its flex filament or wood I'm printing.

I got these for $10, essential CTC upgrade.

http://www.ebay.com.au/itm/131622631...%3AMEBIDX%3AIT