Quote Originally Posted by lucidpsykosis View Post
This blows...I re-leveled the plate using a sheet of paper, only to tear the Kapton film when I started to print my next piece...FML. I'm thinking this printer idea was a bad one. I just wanted to make replacement / add on parts for my RC drones / cars, and anything else that seemed useful.
Lol, wow, thats almost impossible to do unless you bump the build plate and it lowers a little when you are leveling it. This throws off the z height because you end up raising the plate up too high to level it. Ditch the Krapton all together anyway, glass is the way to go. Get 2-3 3/16" glass borosilicate from Mcmaster-Carr. Really 2 is enough.