Ye it does work on M401 and M402.

M48 n 15 x 50 y 50 e
Thats what i entered.
Used it on diffrent places, max deviation ive had was 0.02 so is still okay.
I have a 0.35mm nozzle, so normaly i use a layerheight of 0.1-0.25

Well its okay, its almost always print able, But there is some diffrence with PLA and ABS, Atleast i think that,
That or my diameter was entered wrong (On PLA same settings the nozzle isnt close enough to the bed, The way around with ABS and its a bit to near the bed.)