Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Hybrid View
-
02-23-2017, 05:57 PM #1
- Join Date
- Feb 2017
- Posts
- 5
I've kind of skimmed through the 300+ pages, but I haven't found this, so I'm hoping someone will confirm for me.
I've got a Qidi Tech 1 on the way. I've heard a lot about getting the Swiss all-metal hotend kit. Which one do I need? I've seen a MK10 and some others, but they don't really specify and I'm not sure what to look for.
-
02-24-2017, 07:06 AM #2
The only problem with getting the MicroSwiss conversions for the QIDI is the thermal tubes don't fit very well in the Cooling bar. The tubes on the Qidi are just a little bigger, so the Microswiss fit very loosey and this affects the effectiveness of the cooling bar. A lot use a mount I make to install the Microswiss hot ends, just know that you can't put your stock ones back in with it though.
-
02-24-2017, 10:58 AM #3
- Join Date
- Feb 2017
- Posts
- 5
-
02-26-2017, 09:26 PM #4
- Join Date
- Feb 2016
- Posts
- 1
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials