Results 1 to 7 of 7
Threaded View
-
11-12-2020, 07:53 AM #4
you re calibrated way too close to the printbed.
cura is not good and certainly not easy to use or adjust.
try pdownloading prusaslicer.
https://www.prusa3d.com/prusaslicer/
Also unless you change the bed levelling nuts for locking nuts - bed calibration tends to be a constantly ongoing thing with i3's .
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials