Yes, well... again, I apologize for our website.

Every print head and other yoke-mounted tool comes with the mounting block. That includes everything in this list except for the worklight, which mounts on the side of the engine only (systems include chamber lighing).


We presently have two print heads available:

The MK-1 (Mark One) prints with 1.75mm filament at up to 260°C; this includes ABS, HIPS, PET, PLA, PVA, Nylon (Taulman 618), Ninjaflex, Plastink Rubber, T-Glase, LayWoo-d3, LayBrick, BendLay.
The MK-1 comes with a 0.5mm nozzle. Other sizes are in development; contact us if you have special needs.

The EMO-25 (EMO) prints with emulsifiable extrudables at room temperature; this includes Clays, including Precious Metal Clays (PMC), Porcelain, Plasticine, Plah-Doh, Sugru (Rubber), and RTV Silicone.
The EMO-25 comes with 1.0, 1.5 and 2.0 nozzles. Other sizes are in development; contact us if you have special needs.


We presently have four print heads in development:

The VOL-25 (Volcano), still in development, prints with emulsifiable extrudables at heated temperatures up to 100°C, including wax and chocolate.

An as yet unnamed extruder which will print 1.75mm filament at up to 400°C

An as yet unnamed extruder which will print 3mm filament at up to 260°C

An as yet unnamed extruder which will print 3mm filament at up to 400°C


We presently have the following accessories available:

The analog dial gauge is included with every printer.

The digital microscope (inspector) plugs into the USB hub on the yoke (which moves along the Y-arm).

I can explain live tweaks separately, they are available regardless of what accessories are attached.

The worklight/magnifying glass (watchmaker) attaches to the side of the engine. It is a worklight and magnifying glass.