Selling threaded brass inserts for 3D printed parts.

[LambdaFF]

They work really fine. Thank you. I would recommend you to sell drills / reamers of the appropriate diameters. I couldn't find a reamer at 6,4mm for the 6mm inserts so I made do with a 6,5mm drill. Works too.
IMG_20160109_141554.jpgIMG_20160110_160617.jpg

[ServiceXp]

They work really fine. Thank you. I would recommend you to sell drills / reamers of the appropriate diameters. I couldn't find a reamer at 6,4mm for the 6mm inserts so I made do with a 6,5mm drill. Works too.
IMG_20160109_141554.jpgIMG_20160110_160617.jpg

You are not including the holes in your design? Or are you using these in other projects? I agree, these things are great. I was surprised at how strong the holding force is once melted into the plastic.

[LambdaFF]

I do include the holes, but as explained very well by more experienced people, you can't get a hole at the specified diameter. So, instead of trying to get the correct actual diameter by changing the specified diameter, I just put 2/3 shells and redrill.
for reference, see the hydraraptor blog ;-)