Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 16

Hybrid View

  1. 09-25-2016, 02:13 AM #1
    JensC
    JensC is offline
    Student
    Join Date
    Sep 2016
    Posts
    7
    The speed adjustable fans are the hotend cooling fans. The fan I'm referring to is the aux turbo fan on the left side of the dual extruder assembly. It is enabled thru the keypad menu and only used for PLA filament. It's speed changes almost seem to coincide with certain actions at certain speeds. It might be Astroprint which I just recently connected. I'll try printing from the card to see if there is a difference.
    Reply With Quote Reply With Quote
  2. 09-25-2016, 02:17 AM #2
    Talon 3D
    Talon 3D is offline
    3DPrintBoardPro Member Talon 3D's Avatar
    Join Date
    Aug 2016
    Posts
    262
    Follow Talon 3D On Twitter Add Talon 3D on Thingiverse
    I was referring to the Aux fan. The two on the front as you said is normal.


    Quote Originally Posted by JensC View Post
    The speed adjustable fans are the hotend cooling fans. The fan I'm referring to is the aux turbo fan on the left side of the dual extruder assembly. It is enabled thru the keypad menu and only used for PLA filament. It's speed changes almost seem to coincide with certain actions at certain speeds. It might be Astroprint which I just recently connected. I'll try printing from the card to see if there is a difference.
    Editor in Chief
    Bitsonline

    Tips Appreciated But Not Expected
    BTC: 16wxHvKd3oU6SVjv6FrenqhkvRmc8t7sPy
    DASH: XqyaWxH896j9YeV1M35Gzb5gmRPmPbNDGq
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules