Results 1 to 7 of 7
Threaded View
-
04-05-2019, 02:43 AM #5
Nice! That is two traces side by side or a single trace to get 0.4mm?
I see the nozzle aperture is 0.4mm on this machine.
What layer thickness did you use?
Nice! That is two traces side by side or a single trace to get 0.4mm?
I see the nozzle aperture is 0.4mm on this machine.
What layer thickness did you use?
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help