Simplify3D with FlashForge

[Bassna]

i dont know why you guys are having infill problems. you should not be able to break your infill at all. it should print thick and completely solid if your are set right.

I agree, I posted this on other part's of the board, but here it is again. Not my image but same result's with 200% infill and 30% outline overlap in infill settings...

Nice strong part's.

[jfkansas]

I agree, I posted this on other part's of the board, but here it is again. Not my image but same result's with 200% infill and 30% outline overlap in infill settings...

Nice strong part's.

Want strong, try those settings but do it at 10-15% and 45, -45, 0, 90.

Makerware or any other slicer can't touch this type of functionality.

Sprag, you don't have to test this with all the materials. Once you get an infill you like you just save it and use it for all the filaments. It is just infill and isn't seen. Linear infill prints about 2x as fast also since acceleration doesn't come into play.