Results 1 to 10 of 50
Thread: The curse of ABS (Warping)
Threaded View
-
04-08-2014, 05:51 PM #34
Well i find hairspray good enough on most prints these days,
On sharp corners i normaly use a Brim feature, Almost never failed on me, The only thing that does happen is that the layers split, but thats all realy.
I don't believe we have Elmer's glue in Europe.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion