Any tips in Bridging with PETG?

[EagleSeven]

Hello,

Trying to bridge PETG Inland. The Bridge is maybe .6" long. All I can get is a lot of sagging.

Printing at 235 extruder and 80 bed. Using Simplify 3d and my bridging settings are
Unsupported area threshold =10
extra inflation distance = 1
Bridging extrusion multiplier 140%
Bridging speed multiplier 80%


Thanks for any tips, ask if you need more info.

Need to Lower the extruder Temp.
Try about 210C , (actual temp at nozzle)
(also worked at 200C, but 210 is better temp)

I've bridged 36mm at 210C, using PETG, with only one loose pass.

Note: Indicated temp at printer may Not be actual temp at nozzle,
it's probably Hotter than printer display says