Results 1 to 8 of 8
Thread: ABS printing issues.
Threaded View
-
02-12-2023, 10:17 AM #2
- Join Date
- May 2020
- Posts
- 622
The link doesn't work and I cannot see any photos.
Which extruder are you using ?
I have the Qidi X CF-pro and I gave up with the standard extruder and just used the High temp one. I only use ASA but its similar to using ABS I believe.
Prusa slicer gives me better results than the Qidi slicer. I no longer rely on the auto bed leveling but manualy leveled the bed using one of the many public domain layer height STL files available from such as Prusa Printables.
I just shimed the PEI plate up by sticking strips of adhesive aluminium foil to the underside and set the springs to firm.Just kept checking the layer height until I was happy.
Unfortunately my Qidi X CF pro is not very consistent with results, generally more bad than good, several faulty parts have already been replaced.Last edited by Bikeracer2020; 02-12-2023 at 10:23 AM.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials