Results 1 to 10 of 41
Hybrid View
-
02-11-2019, 07:55 AM #1
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
What are you using for Nozzle and Bed temperature.
printing temp 198C
printing temp Initial layer 198C
Initial printing temp 188C
Final printing temp 183C
Default build printing temp 70C
build printing temp 50C
build printing temp Initial layer 50C
What print speed percent is Cura set to.
Print speed 60mm/s
Initial layer print speed 10mm/s
Overhanging wall speed 100%
The popping sound could be moisture in the filament
-
02-11-2019, 12:56 PM #2
I do not know was only making a statement, Have you tried to print a temperature tower.
Do not like the one I selected More here
Your temperature settings look to be the same as what is being used in my 3DP11/12 though all 3D Printers do not Print using the exact same temperatures.
-
02-12-2019, 11:14 AM #3
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
I printed the tower but it didn't finish.
20190212_180304.jpg20190212_180320.jpg20190212_181255.jpg
Thefirst layer looks great now.
-
02-13-2019, 06:44 AM #4
It is OK.
That it did not finish you got good results you may want to search and print a new tower with higher printer temps.
-
02-13-2019, 12:55 PM #5
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
Well here it is, looks like 205C and higher gave good results.
20190213_194719.jpg20190213_194851.jpg
-
02-13-2019, 06:40 PM #6
Excellent!!!
Any other Questions.
-
02-14-2019, 09:22 AM #7
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
Well i tried to print a tension fix twise (https://www.thingiverse.com/thing:3066664) but it came out like this.
20190214_161437.jpg
What am i doing wrong the heat tower went well. Why won't these.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials