Compatible filaments?

[hsus]

I just got some LayBrick filament but can't get it to feed, it grabs the filament and drags it down but nothing out of the nozzle, shouldn't be a temperature issue, seeing as one can print lay brick at lower tempts than the new matter standard PLA 200 c.
Has anyone else encountered this? Any solution? (will contact new matter support live chat when available)

Edit:
So trying to get the filament out it broke off... So going to follow these instructions http://support.newmatter.com/custome...nload-filament
and then try to see if this http://support.newmatter.com/custome...g-installation can help load the filament...

[hsus]

I just got some LayBrick filament but can't get it to feed, it grabs the filament and drags it down but nothing out of the nozzle, shouldn't be a temperature issue, seeing as one can print lay brick at lower tempts than the new matter standard PLA 200 c.
Has anyone else encountered this? Any solution? (will contact new matter support live chat when available)

Update on this; Seems to be some sort of issue with feeding filament, not specific to LayBrick, or any other filament. In fact I'm printing with LayBrick right now, will report back with results. I've just printed successfully with LayWoo-D3, posted about it in the showcase prints thread.