Results 1 to 10 of 10
Thread: Need Print Bed Materials?
Hybrid View
-
04-22-2016, 08:15 AM #1
Last edited by Geoff; 04-22-2016 at 09:21 PM.
Hex3D - 3D Printing and Design http://www.hex3d.com
-
04-22-2016, 09:52 AM #2
- Join Date
- Dec 2015
- Location
- Illinois
- Posts
- 13
Its okay we are just trying to help. We just received word back from our rep and unfortunately the "blue" tape you listed is not available in master rolls. However he recommended something different but very similar if you are willing to try a sample cut to 5-6" please email resources@cshyde.com with your shipping info.
Thank you. Have a great day!
-
04-22-2016, 09:17 PM #3
I will do, thanks. If you are going to cut it I'll get it at 5.5", I would only need one or two samples.
thanks for your help.
p.s I know a silly question, but you guys wouldn't possibly be able to do round cuts could you? I also use 4 x delta machines, varying from 150mm to 180mm diameter, and I use a few pieces of tape and cut around the edge, it would be so nice to just use one big round cut of tape, but this is not something that's easy to find, there would be a fair bit of wastage cutting circles out of a length I imagine.Hex3D - 3D Printing and Design http://www.hex3d.com
-
04-26-2016, 08:57 AM #4
- Join Date
- Dec 2015
- Location
- Illinois
- Posts
- 13
Your welcome, Please send your shipping address to resources@cshyde.com so we can ship out your samples.
Also, we are able to cut to round cuts we will send you some of those too.
Hope they work out for you!
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials