Is Slic3r's Bridging capability busted???

[3dkarma]

There are a number of historic bugs in Slic3r regarding generating bridges in the wrong direction - it seems you've hit upon another one.

I had a brief look at the STL and had some success by modifying the parts that would be printed in yellow. The internal edges are angled, which Slic3r doesn't seem to like. I made the edges square internally on one of the pieces and bridging was generated correctly across the shorter span.

[Roxy]

There are a number of historic bugs in Slic3r regarding generating bridges in the wrong direction - it seems you've hit upon another one.

I had a brief look at the STL and had some success by modifying the parts that would be printed in yellow. The internal edges are angled, which Slic3r doesn't seem to like. I made the edges square internally on one of the pieces and bridging was generated correctly across the shorter span.

OH??? The part looks better angled, but if that is what it takes to get it to bridge.... So Be It!!! I'll change the source and see if I can get Slic3r to behave itself!

THANKS!!!!