Results 1 to 9 of 9
Hybrid View
-
10-18-2015, 01:19 PM #1
- Join Date
- Sep 2015
- Posts
- 4
-
10-18-2015, 03:46 PM #2
Curious, is the aluminum gear Larger diameter than the steel one, ?
It appears to be, but it may not be larger where the Teeth are ?
If it is larger diameter at teeth, that may explain why it works better ?
Or was the steel-tooth gear clogged with filament, making it slip ?
(I normally clean that gear after about 25 prints, to remove residue,
and Flex-filament would require it be cleaned more often)Last edited by EagleSeven; 10-18-2015 at 03:59 PM.
-
10-18-2015, 09:54 PM #3
- Join Date
- Sep 2015
- Posts
- 9
Thanks for the response. I have the alum one as well, I am betting the sharper pointed steel one was cutting in and grabbing the TPU, then pulling it around...
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help