Auto_Bed_Leveling: Z-Probe Repeatability code

[DrLuigi]

Will try it tomorow or so,

Will edit this post to tell you what happend!

/edit

Seems to work fine now

Like the update, It didnt gave the (3 of 10 z: 2.918500)
before

M48 Z-Probe Repeatability test. Version 1.60
M48 'e' option specified.
1 of 10 z: 2.907250
2 of 10 z: 2.903000
3 of 10 z: 2.918500
4 of 10 z: 2.918250
5 of 10 z: 2.911250
6 of 10 z: 2.918500
7 of 10 z: 2.918750
8 of 10 z: 2.907500
9 of 10 z: 2.926250
10 of 10 z: 2.907000
Mean: 2.913625
Standard Deviation: 0.007037
echo:endstops hit: Z:2.91

Seems nice. I guess i should do a first layer of 0.2 tho. To calibrate i did it to 0.1 for my first layer to fine tune it. But when i retry it on 0.1 it is sometime iffy, not at the sweet spot.

/edit second try on another place,
SENDING:M48 n 10 x 124 y 100 e v 2
M48 Z-Probe Repeatability test. Version 1.60
M48 'e' option specified.
1 of 10 z: 2.789000
2 of 10 z: 2.769000
3 of 10 z: 2.760750
4 of 10 z: 2.786000
5 of 10 z: 2.760000
6 of 10 z: 2.781250
7 of 10 z: 2.759750
8 of 10 z: 2.767750
9 of 10 z: 2.772000
10 of 10 z: 2.774750
Mean: 2.772025
Standard Deviation: 0.010128
echo:endstops hit: Z:2.78


I am kinda suprised, i thought it wouldnt be this accurate!

Thanks for the script