Results 1 to 5 of 5
Thread: ABS Layer Quality and Adhesion
Hybrid View
-
09-18-2019, 08:06 PM #1
- Join Date
- Aug 2015
- Posts
- 256
It REALLY sounds like you have a leveling issue--like it's air printing the first layer. How are you leveling? if you're using the paper method, try leveling it so the paper is difficult (but possible) to move under the nozzle.
What are you using to promote adhesion? plain glass isn't enough in my experience. I use hairspray, which helps immensely--in fact it's a little too good.
-
09-19-2019, 12:18 PM #2
- Join Date
- Sep 2019
- Posts
- 5
-
09-20-2019, 01:51 PM #3
- Join Date
- Sep 2019
- Posts
- 5
I replaced the foil tape at the corners of the plate. Scrubbed the plate and releveled it. That seems to have done the trick.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help