Results 1 to 10 of 36
Hybrid View
-
12-18-2015, 07:29 PM #1
- Join Date
- Dec 2015
- Posts
- 15
I just tested between Neutral and Ground and I am getting about 675 mv which is about what is floating around in my machine. I do live in a dry climate, so maybe static charge is a big factor here
Did a little reading, apparently this is a pretty good value. It should be no higher than 3 volts am I correct? 3 volts on 120v AC corresponds to about a 3% voltage drop, which is acceptable, I measured .675VLast edited by masterchafed; 12-18-2015 at 07:35 PM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials