Creality Ender 5 plus - 32bit motherboard with drivers

[Pavelev]

Hi.

Please buy me if you buy this board S6 V2.0 Board 32 Bit Control Board Support 6X TMC Drivers Uart / SPI Flying Wire XH / MX Connector VS F6 V1.3 SKR V1.3
https://www.aliexpress.com/i/4000345369228.html
Why there is a price of 33.32 - 36.10 US $. Will it be on 24V?

What drivers should I buy?
https://www.aliexpress.com/wholesale...t=TMC2226+V1.0

The original touch screen of the Creality Ender 5 plus can be connected to this board.

Will I need to buy anything else to connect this board?

Thank you very much for your help.

[AutoWiz]

Will I need to buy anything else to connect this board?

I like my connections and wiring to be tight and clean and so when I aquire a new mainboard I will usually identify the connectors I need which lately all seem to be the mini jst connectors and i head over to ebay and find a bunch of pigtails and break out my soldering station and make my wiring look like this. It is not absolutely necessary but it does give the printer a finished look and also does a real good job at preventing the micro motion and fretting withing electical connections. Especially on robots with 3 moving axes..