Quote Originally Posted by Roxy View Post
does the code behave as expected and do what people wanted? Can you add the semi-colon and invoke the EEPROM Print so we can check if the matrix prints OK ?
Connecting...
start
Printer is now online.
echo: External Reset
Marlin1.0.0
echo: Last Updated: Nov 1 2014 10-20-14 13:55:13 | Author: (AbuMaia, MakerFarm Prusa i3v 8)
Compiled: Nov 1 2014
echo: Free Memory: 3486 PlannerBufferBytes: 1232
echo:Stored settings retrieved
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z4000.00 E900.00
echo:
Bed Level Correction Matrix:
1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
echo:Maximum feedrates (mm/s):
echo: M203 X250.00 Y250.00 Z2.00 E22.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X1000 Y1000 Z5 E1000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S500.00 T500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P24.49 I2.34 D64.21
echo:SD card ok
SENDING:G28
SENDING:G29 n 4
Eqn coefficients: a: 0.00 b: 0.00 d: 1.88
planeNormal x: -0.00 y: -0.00 z: 1.00

Bed Level Correction Matrix:
0.999993 0.000000 0.003794
-0.000001 1.000000 0.000163
-0.003794 -0.000163 0.999993
echo:endstops hit: Z:2.00
>>>M500
SENDING:M500
echo:Settings Stored
>>>M503
SENDING:M503
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z4000.00 E900.00
echo:
Bed Level Correction Matrix:
0.999993 0.000000 0.003794
-0.000001 1.000000 0.000163
-0.003794 -0.000163 0.999993
echo:Maximum feedrates (mm/s):
echo: M203 X250.00 Y250.00 Z2.00 E22.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X1000 Y1000 Z5 E1000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S500.00 T500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P24.49 I2.34 D64.21
Disconnected. (I powered off the printer here, then turned it back on and re-connected)
Connecting...
start
Printer is now online.
echo: External Reset
Marlin1.0.0
echo: Last Updated: Nov 1 2014 10-20-14 13:55:13 | Author: (AbuMaia, MakerFarm Prusa i3v 8)
Compiled: Nov 1 2014
echo: Free Memory: 3486 PlannerBufferBytes: 1232
echo:Stored settings retrieved
echo:Steps per unit:
echo: M92 X80.00 Y80.00 Z4000.00 E900.00
echo:
Bed Level Correction Matrix:
0.999993 0.000000 0.003794
-0.000001 1.000000 0.000163
-0.003794 -0.000163 0.999993
echo:Maximum feedrates (mm/s):
echo: M203 X250.00 Y250.00 Z2.00 E22.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X1000 Y1000 Z5 E1000
echo:Acceleration: S=acceleration, T=retract acceleration
echo: M204 S500.00 T500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo: M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo: M301 P24.49 I2.34 D64.21
echo:SD card ok