Results 1 to 6 of 6
Thread: First layer issues
Hybrid View
-
01-08-2022, 10:17 PM #1
- Join Date
- May 2018
- Posts
- 566
can't see anything with those tiny pics.. but if you have what looks like waves with first layer.. nozzle probably too close to bed.. Ender machines are low quality toys.. good luck,you will need it with that level of product.
-
01-08-2022, 10:45 PM #2
- Join Date
- Jan 2022
- Posts
- 3
I have the bed manually leveled and also with the CR touch automatic level at a piece of a2 paper width from the bed. I only have the issue with this print and not others that are similar to this one. Everything else I print with this material and parameters comes out great. Anything else I can try?
-
01-09-2022, 06:58 AM #3
- Join Date
- May 2018
- Posts
- 566
Double check your slicer and make sure you don't have a negative value (making the nozzle closer) in the Z offset setting, assuming your slicer has that parameter. What happens if you let the part finish printing?
-
01-09-2022, 08:17 AM #4
- Join Date
- Jan 2022
- Posts
- 3
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials