Results 1 to 10 of 74
Thread: Free build plate!!!!
Hybrid View
-
06-11-2015, 11:16 AM #1
- Join Date
- Jun 2015
- Posts
- 2
I wouldn't mind giving it a shot.
Rapide Lite 200 from Rapide3D
The whole bed is 215mm x 215mm, I'm assuming I can nip off the corners of your plate to allow for the small corner screws. If not, accounting for the screws, the bed is 215mm x 202mm.
-
06-11-2015, 01:23 PM #2
- Join Date
- Jun 2015
- Posts
- 34
-
06-11-2015, 01:39 PM #3
- Join Date
- Jun 2015
- Posts
- 2
That'd be great. I'll PM you ...
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion