Results 1 to 10 of 16
Threaded View
-
03-28-2015, 12:34 AM #8
- Join Date
- Aug 2014
- Location
- Montreal, Quebec
- Posts
- 576
The slicer just had failed on your cylinder.
This happens often with thin wall extrusion, fast print and on top of that if you ever print with high Z layer .
One solution to check, print one, but slowly with .1 or .2mm height AND try to increase thickness of the object itself.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials