Results 1 to 10 of 107
Hybrid View
-
04-03-2016, 05:17 PM #1
- Join Date
- Apr 2016
- Posts
- 1
Still selling your setup?
- Are you still selling the setup for adjustment on the dual extruders for the FF creator pro?
- Do you recommend the smaller filament ptfe and why?
- Do you still use the same cooling setup for PLA or can you modify pretty much the same way with any of the mod's people have posted???
Thanks in advance!
-
04-04-2016, 04:42 AM #2
Hey there. Yep I have some in stock.
I do recommend the smaller PTFE tubing. It is more flexible and it allows you to load a new roll of filament without pausing since you can just push a new filament roll right after the empty one. With the bigger tubing this is more difficult since the filaments will pass each other in the tubing. The PTFE is translucent also so you can see where the filament is in the tubing.
I don't run any PLA, but the big frog looking PLA fan setup clips into the front of the carriage just like normal.
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials