Results 1 to 10 of 11
Hybrid View
-
04-25-2021, 06:05 PM #1
- Join Date
- Apr 2021
- Posts
- 186
Any chance the stepper plug was reversed originally (plugged in wrong way)?
-
04-26-2021, 11:47 AM #2
- Join Date
- Apr 2021
- Posts
- 6
That was my first thought but unfortunately the plugs can only be installed one way due to the way they are shaped. I'm considering putting Advi3++ firmware on the printer and seeing if I can reset the direction of travel via that way, but it will be a good bit of reading before I understand what the hell is going on. Ideally I dont want to flash the printer, but it looks like it may be my only option without potentially frying my board from messing with electrical cables.
-
04-26-2021, 08:33 PM #3
- Join Date
- Apr 2021
- Posts
- 186
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help