Results 1 to 10 of 68
Threaded View
-
06-28-2014, 04:42 PM #11
- Join Date
- Jun 2014
- Posts
- 37
Hi Roxy sorry I havent got back to you for a couple of days but work has been crazy and I needed a rest. I'm just about to try a print with pronterface and your code and thought i'd just add the M48 code first. When I added in the code it wouldnt compile saying #endif without #if at the very end of your code, I tried just removing the #endif line and it compiled and seems to work but don't really know if i've done something stupid. Here are my first results just sending an M48 command
>>>M48
SENDING:M48
M48 Z-Probe Repeatability test. Version 1.85
Mean: -0.167070
Standard Deviation: 0.002544
echo:endstops hit: Z:-0.17
I will have a go at printing something now and see how it goes but when I ran G29 last time this was my result
Bed Level Correction Matrix:
0.999998 0.000000 0.002131
0.000000 0.999999 0.001302
-0.002131 -0.001302 0.999997
isnt the last line supposed to be positive numbers? Or have I got that confused? Thanks again in advance
*Just wanted to try it one more time just to make sure
>>>M48 n10 V4
SENDING:M48 n10 V4
M48 Z-Probe Repeatability test. Version 1.85
Positioning probe for the test.
1 of 10 z: -0.791797 mean: -0.791797 sigma: 0.000000
2 of 10 z: -0.793750 mean: -0.792773 sigma: 0.000977
3 of 10 z: -0.792187 mean: -0.792578 sigma: 0.000844
4 of 10 z: -0.794531 mean: -0.793066 sigma: 0.001118
5 of 10 z: -0.793359 mean: -0.793125 sigma: 0.001007
6 of 10 z: -0.798828 mean: -0.794075 sigma: 0.002316
7 of 10 z: -0.807422 mean: -0.795982 sigma: 0.005139
8 of 10 z: -0.805469 mean: -0.797168 sigma: 0.005740
9 of 10 z: -0.800781 mean: -0.797569 sigma: 0.005530
10 of 10 z: -0.800000 mean: -0.797812 sigma: 0.005296
Mean: -0.797812
Standard Deviation: 0.005296
echo:endstops hit: Z:-0.80Last edited by brainscan; 06-28-2014 at 04:50 PM. Reason: Added another set of results
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help