Results 1 to 9 of 9
Thread: petg print very brittle
Threaded View
-
06-27-2017, 05:17 PM #8
- Join Date
- Jun 2017
- Posts
- 3
Ok it turned out to be wet filament. Put it in a 90 deg f heater overnight and prints are much better. Printing at 245 and 60 looks pretty good. Just some fine tuning and I should be in good shape. Thanks for all the help.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help