Results 1 to 7 of 7
Thread: ABL Servo probe issues
Threaded View
-
10-06-2016, 03:29 PM #2
What you are describing very likely is a servo problem. Are you seeing any twitching of the probe leg when it should be sitting still?
Are you using a blue TowerPro servo from eBay? Those are of horrible quality.
The EMax-ES08A servos seem to give very good and consistent results. And they are not very expensive.
http://www.ebay.com/itm/EMax-ES08A-I...QAAOSwGtRX01j-
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion