Results 1 to 10 of 10
Thread: Room Temperature Limits
Threaded View
-
10-06-2016, 11:42 AM #8
- Join Date
- Apr 2015
- Location
- Northern Ohio
- Posts
- 198
^^This is the right advice. I routinely print at those temps and what he is suggesting is sound advice. I turn the machine on and set the bed to the temp I am desiring and let it sit a full temp for quite a bit if it's cold out. The filament extrusion temp can just be bumped up higher to compensate. I also use brims to run a good bit material through the nozzle before it starts to actually print the part. I only use ABS and I almost never have issues printing.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion