Results 1 to 7 of 7
Threaded View
-
10-05-2016, 12:18 PM #4
it's just too thin :-)
it's 0.04 of a mm.
credit cards are actually around 0.8mm thick.
That's 4x 0.2mm layers.
What you are trying to do is just ridiculously thin
it's just too thin :-)
it's 0.04 of a mm.
credit cards are actually around 0.8mm thick.
That's 4x 0.2mm layers.
What you are trying to do is just ridiculously thin
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion