Results 1 to 10 of 110
Threaded View
-
09-28-2016, 11:46 AM #11
- Join Date
- Jul 2016
- Posts
- 48
Ok. I've uploaded the latest pics.
With the laser set to 100%, the print was solid but still slightly rubbery. That actually made it a bit easier to get it off the mesh without totally destroying the bottom of the print. Just a little mangled instead :-)
http://postimg.org/gallery/2g96zxbtg/Last edited by Builder1; 09-28-2016 at 12:06 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion