![Quote](images/tf_ideal/misc/quote_icon.png)
Originally Posted by
Kelador
Cheers guys
So far i have found the following:-
A nozzle clog
A tube clog
AND a gear clog ( fillament jammed in the motor cog)
I have cleared all these but am still getting the pulsing.
I have tried the filaments i have i know are good in both extruders but this left one still a no go.
Does anyone know if one of the screws behind the heat sink is a tensioner
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help