Results 1 to 10 of 16
Thread: QIDI 1 surging fan
Threaded View
-
09-25-2016, 02:26 AM #5
- Join Date
- Sep 2016
- Posts
- 7
You said there are hot end fan speed settings in Simplify3D. This I know. They do not, however, apply to the turbo fan. It's either on or off. The hot end fans run fine making it unlikely to be a PS issue.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion