Results 1 to 10 of 19
Threaded View
-
09-21-2016, 08:03 PM #12
- Join Date
- Sep 2016
- Posts
- 12
I just tried it again with these settings:
Screen Shot 2016-09-21 at 9.02.36 PM.jpg
But still failure, as soon as it reaches the supports the build plate and the extruder gradually get separated by a centimeter or so. I don't know what to do. So as soon as the print reaches the part where it will start the support structures: this part:
Screen Shot 2016-09-21 at 9.21.20 PM.jpg
The extruder and build plate are not closely together (shown in the video)Last edited by fontseeker; 09-21-2016 at 08:24 PM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)